Product description

Teja phos -222 is an accelerated hot dip Zinc/Nickel Phosphating process which produces fine smooth coating on steel, Aluminium and zinc surfaces. Smooth coating serves as good base for paint and reduce consumption of paint and retains paint gloss. Teja phos -222 processes are easy to operate and are controlled by simple tests requiring no chemical knowledge. No fumes and odours are given off.

Product Specifications

Colour

Light Green Liquid

Odour

Slightly Pungent

Foaming Tendency

Nil

Reliability

Good

Handling

Avoid Skin Contact

Solubility

Good

pH

Acidic Range

Toxicity

Acidic

Flash Point

Nil

Pollution Hazard

Treatable

Product Operating Data

Concentration

5 liter Teja phos -222 and 100 ml.Activator(Tejaphos-NL) or 25 Gms Tejaphos-NP per 100 ltr. of Water.

Temperature

60 - 70°C

Immersion time

5 – 10 min

Chemical Replenishment

Restore the bath to the working level by adding water to makeup evaporation loss and drag out losses. Check the Teja phos -222 pointage.

Safety Measures

Teja phos-222 is an acidic liquid material, and while handling proper care should be taken. Protect eyes and skin by means of goggles, aprons, gloves and face shield etc. If it comes in contact with skin and eyes wash thoroughly with flush off water and get medical advice. For further Information please refer our Material Handling and Personal safety Data Sheet No.2.

General Information
Corrosion Resistance: Excellent.